Flooring category
Carpet Tile
Modular carpet tiles for offices, retail, and commercial spaces.
Get a free quoteAirlay
Altitude
Airlay
Como
Airlay
Corporation
Airlay
Dusk
Airlay
Dynamic
Airlay
Elegance
Airlay
Lakeside
Airlay
Nova
Airlay
Paragon
Airlay
Sierra
Godfrey Hirst
Urbanova
Signature Floors
Dynamic Plank
Signature Floors
Fusion Plank
Signature Floors
Rapid
Signature Floors
Rhythm
Carpet tile, explained
How carpet tile became the standard soft floor in commercial buildings
Maintenance is built into the product. One stained square by a desk or a worn one in a doorway comes up and a fresh tile drops in — minutes of work, no re-lay, no shutting the floor. Spare tiles from the same dye lot can also be rotated through the heavy spots to spread the wear, and over a building's life that adds up to a lower cost than replacing broadloom.
Columns, floor boxes and service penetrations slow a roll of broadloom down; tile just works around them. It also takes the edge off footfall and echo in open-plan areas, and a commercial backing sits flat without needing full adhesive. Where the job is a multi-level residential common area — a lobby, lift lobby or corridor — we move to fire-rated tile that satisfies the critical-radiant-flux requirement the National Construction Code sets for shared egress paths.
Working from the ranges we hold, Urban Commercial Flooring specifies backing, fibre and fire rating room by room and installs commercial carpet tile anywhere in Victoria. Occupied buildings get a staged, after-hours program so nothing has to stop.
Picking the right commercial carpet tile
- Backing & format
- Choose between bitumen and PVC-free backings such as EcoWorx, in 50×50 squares or slim plank shapes. Whichever you pick, the modular format is what lets a single tile be swapped without touching the rest of the floor.
- Fibre & durability
- For heavy commercial traffic, solution-dyed nylon holds its colour and shrugs off stains. Always read the wear rating against how the area will actually be used.
- Fire rating
- Egress paths in high-rise and public buildings call for a fire-rated tile meeting the critical-radiant-flux figure set out in the NCC / BCA.
- Noise & upkeep
- Footfall and echo both drop once tile goes down, and because the floor is modular, replacing worn areas stays quick and inexpensive for years.
Specified across these sectors
Questions
Common questions
Carpet tile or broadloom — which should you pick?
Modularity is the whole argument. A worn or marked tile comes out on its own without re-laying the room, and tiles can be shuffled to spread wear evenly. In a busy commercial building that keeps maintenance cheaper, and installation around services goes faster too.
Does carpet tile work in high-rise common areas?
It is, provided the tile is fire-rated. Lobbies, lift lobbies and corridors are shared egress paths, so we specify a tile meeting critical-radiant-flux — that is the correct soft floor for common areas in a multi-level residential building.
How much noise does carpet tile soak up?
It does. Both footfall and echo drop noticeably, which is exactly why open-plan workplaces, schools and corridors put it on the spec when acoustic comfort matters.
Do you cover all of Victoria for supply and install?
We cover the whole state, regional areas included. Offices and public buildings that stay occupied are done in stages after hours.