Commercial flooring
Food-grade & lab resin.
Poured, jointless resin floors made for food production, labs and washdown.
Why resin flooring
Built for hygiene and washdown
Food-grade and laboratory floors are poured rather than laid. Epoxy or polyurethane resin goes down wet and cures into one impervious sheet, leaving no grout line, joint or crack where bacteria could take hold. The result copes with spills, aggressive chemicals, hard cleaning and washdown after washdown.
Our team prepares the substrate, primes it and pours each resin system to the manufacturer's specification, on commercial projects throughout Melbourne and Victoria. The workmanship carries our 2-year warranty.
- 01
Seamless & Jointless
One continuous pour means no seams and no grout lines, so food debris, water and bacteria have nowhere to gather and there is no edge waiting to lift.
- 02
Watertight & Hygienic
The cured surface is sealed and non-porous, which is what strict food-safety and laboratory hygiene rules require, and it cleans down fast between shifts.
- 03
Shrugs Off Chemicals & Stains
Both epoxy and PU resins hold up against the oils, acids, sanitisers and staining agents that kitchens, production lines and laboratories throw at a floor.
- 04
Handles Sudden Heat Changes
Where boiling spills, steam cleaning or sudden temperature swings are part of the job — kitchens, washdown bays, cool rooms — polyurethane systems take it without cracking.
- 05
Coved Edges, Slip-Rated Surface
For wet areas we broadcast anti-slip aggregate into the surface, and the resin is coved up the wall so the floor-to-wall junction is sealed and simple to clean.
- 06
Laid to the Maker's Spec
Our team preps and primes the substrate, then pours the resin exactly as the manufacturer specifies — with a 2-year workmanship warranty behind it.
Where food-grade & lab flooring is used
Food-grade resin flooring shows up wherever hygiene, chemical resistance and washdown are non-negotiable: food-prep areas and commercial kitchens, beverage and food production floors, cleanrooms and laboratories, cool rooms, and industrial wet-processing or washdown spaces.
Which system suits depends entirely on what happens in the room. Epoxy handles hard wear and chemical attack; polyurethane is the pick for heat and washdown; anti-slip levels and coving get detailed to match. Talk to our team and we will set the correct build-up for each space.
Spec support
Planning a commercial project?
Describe your kitchen, production floor or laboratory and we'll specify the resin system that fits, then lay it to standard anywhere in Victoria.